3D Systems PROJET 3500 Procedurehandleiding - Pagina 6
Blader online of download pdf Procedurehandleiding voor {categorie_naam} 3D Systems PROJET 3500. 3D Systems PROJET 3500 7 pagina's. Visijet m3 black material hygiene
Pagina afdrukkenThe printer will start a print that will be approximately 10 minutes in duration.
The build will lay down 1 layer of part and support material.
STEP 4:
Inspect the test build for
consistency
A good test build should be
•
solid across the entire line for
both part and support
materials.
Pay particular attention to the
•
part material line to
determine if additional
hygiene should be performed.
VisiJet® M3 Black Printhead Hygiene
Example of a Good Test Print
Test print should be free of spaces or
•
gaps
.