CAME Z Series Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} CAME Z Series. CAME Z Series 12 pagina's. Control board
Ook voor CAME Z Series: Handmatig (8 pagina's), Handmatig (20 pagina's), Handmatig (4 pagina's), Handmatig (4 pagina's), Handmatig (17 pagina's), Handmatig (17 pagina's), Handmatig (13 pagina's), Handmatig (13 pagina's), Handmatig (16 pagina's), Handmatig (16 pagina's), Handmatig (12 pagina's), Handmatig (12 pagina's), Handmatig (18 pagina's), Installatiehandleiding (11 pagina's), Handmatig (8 pagina's), Handmatig (20 pagina's), Handmatig (12 pagina's), Handmatig (12 pagina's), Handleiding technische documentatie (16 pagina's), Gebruiksaanwijzing (16 pagina's), Instructies (4 pagina's), Beknopte handleiding (2 pagina's), Aansluithandleiding (4 pagina's), Handmatig (4 pagina's), Handmatig (12 pagina's), Handmatig (20 pagina's), Handmatig (15 pagina's), Gebruiksaanwijzing (12 pagina's), Handmatig (16 pagina's)

Pagina afdrukken

Description

Electric panel suitable for controlling the

automation of 230V swing gates with up to

320W power.

Fully designed and built by CAME CAN-

CELLI AUTOMATICI S.p.A., it complies

with regulations in force.

ABS container with IP54 protection level.

The panel runs on 230V with a 50÷60 Hz

frequency on terminals L-N, and the inlet is

protected with 5A fuses.

Control circuit and accessory power sup-

ply: 24V, protected by a 1.6A fuse.

The accessories' overall wattage must not

be over 20W.

Safety

Reopening during closure: safety device

connected with terminals 2-C1. The photo-

electric cells detect an obstacle while the

gate is closing, causing the gate to reverse

the direction of movement until it is fully

open.

Total stop: safety device connected

to terminals 1-2. The gate stops,

discontinuing the automatic closure cycle.

Use the keypad or the radio remote control

for the gate to resume movement.

Optional accessories

3W max. open gate pilot lamp connected

to 10-5. Lamp signals the gate's open

position. It turns off when the gate reaches

the closure end-stop.

GENERAL SPECIFICATIONS

Other functions

Automatic closure. The automatic closure

timer is self-powered in the aperture end-

stop. The adjustable time set in any case

depends on possible safety accessories

and is discontinued after a stop or when

there is no electricity.

Steady movement control. The gate remains

in function by keeping the key pressed (it

overrides the radio remote control function).

It is activated when the T.L. trimmer is set at

its minimum.

Adjustments

2nd motor closure delay time.

Automatic closure time.

Work time.

Warning! Turn off power supply before

opening the apparatus.