3DGence DOUBLE P255 Onderhoudshandleiding - Pagina 11

Blader online of download pdf Onderhoudshandleiding voor {categorie_naam} 3DGence DOUBLE P255. 3DGence DOUBLE P255 19 pagina's.

First of all, on the out of calibrated model find the line on which the model material (fig. 64, red) is best covered with

support material (fig. 64, white). On the top model (fig. 64), the materials overlap best on the third line to the left of

point 0.00. This line is distanced from point 0.00 at -0.15mm. This means that the X offset value is shifted by -0.15

mm and by this value the X offset value entered in the calibration menu must be corrected (the offset procedure in

the X and Y axis is described below).

Fig. 64 Comparison of correctly calibrated offset values with incorrectly calibrated ones

3DGence DOUBLE P255 - maintenance activities | version 07.2021