3DGence DOUBLE P255 유지 관리 매뉴얼 - 페이지 11

{카테고리_이름} 3DGence DOUBLE P255에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DGence DOUBLE P255 19 페이지.

First of all, on the out of calibrated model find the line on which the model material (fig. 64, red) is best covered with

support material (fig. 64, white). On the top model (fig. 64), the materials overlap best on the third line to the left of

point 0.00. This line is distanced from point 0.00 at -0.15mm. This means that the X offset value is shifted by -0.15

mm and by this value the X offset value entered in the calibration menu must be corrected (the offset procedure in

the X and Y axis is described below).

Fig. 64 Comparison of correctly calibrated offset values with incorrectly calibrated ones

3DGence DOUBLE P255 - maintenance activities | version 07.2021