3Dlabs X400 Snelstart- en referentiehandleiding - Pagina 8
Blader online of download pdf Snelstart- en referentiehandleiding voor {categorie_naam} 3Dlabs X400. 3Dlabs X400 16 pagina's.
Pagina afdrukken
Unscrew the tension nut so that the spring is fairly loose. Do not loosen it so much that the nut
2)
comes off of the screw.
Open the rear door of the printer and feed the material through the tube until about 2" of filament
3)
comes out of the other end inside the printer.
Carefully hang the spool onto the mount and close the door.
4)
Page | 8