3Dlabs X400 Snelstart- en referentiehandleiding - Pagina 9
Blader online of download pdf Snelstart- en referentiehandleiding voor {categorie_naam} 3Dlabs X400. 3Dlabs X400 16 pagina's.
Pagina afdrukken
5) Cut the tip of the filament at a 45-degree angle with flush cutters and insert it into the hole on top
of the extruder head where you removed the coupling.
6) Press down firmly on the filament and insert it about 1" (you may have to press it in a couple of
times) into the hole.
Page | 9