3Doodler Create+ Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3Doodler Create+. 3Doodler Create+ 16 pagina's.
Ook voor 3Doodler Create+: Gebruikershandleiding (11 pagina's)
Pagina afdrukken
Step 1: Turn on your 3Doodler
Create+ and wait for it to heat up
1
Plug in the yellow hole of
3Doodler Create+.
3
Light will glow RED while the Pen is reaching the temperature
required to melt your Plastic. Once Light has turned BLUE,
your Pen is ready to extrude Plastic.
Step 2: Load and extrude Plastic
1
Select one strand of ABS
(MATTE) Plastic (provided in
your 3Doodler Create+ box).
3
Click FAST button once and
release. You will hear the
Drive Gear start.
Press the FAST button once to
stop extruding.
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 3
Power Adapter
x1
5
x1
2
Slide Control Switch to
ABS / FLX.
60-90
secs
Light to BLUE
2
Making sure the Light is still
BLUE, push the Plastic through
the Plastic Loading Port.
4
After 10-15 seconds, Plastic
will begin extruding from the
Nozzle. Extruded Plastic will
harden after a few seconds.
3
BLUE Light
11/5/2018 11:37 AM
Step
Use box
your na
Write you
provided
pencil, or
utensil of
suggest cu
the letters
Doodle yo
continuou
by draggin
the paper
writing wi
letters con
movemen
Bend the
pop your