dixell COOL MATE XLR470 Bedieningshandleiding - Pagina 6

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} dixell COOL MATE XLR470. dixell COOL MATE XLR470 18 pagina's. Dual temperature controller

Pagina afdrukken
dixell COOL MATE XLR470 Bedieningshandleiding
dIXEL
dIXEL
dIXEL
dIXEL
To lock and unlock the keyboard.
+
To enter the programming mode.
+
To exit the programming mode.
+
1.4 MEANING OF THE ICONS
ICON
FUNCTION
ON
ON
ON
FLASHING
ON
FLASHING
ON
FLASHING
ON
ON
FLASHING
ON
FLASHING
ON
1.5 HOW TO SEE AND MODIFY THE SET-POINT
Push and release the SET1 or SET2 key:
the bottom display shows the label St1 or St2
the upper display shows the Set point value flashing
To change the Set value push the o
To memorise the new set point value push the SET1 or SET2 key again or wait 15s.
1.6
HOW TO START A MANUAL DEFROST FOR THE SECTION 1 OR SECTION 2
To start a defrost for the section 1: push the DOWN key(
To start a defrost for the section 2: push the UP key(
1.7 HOW TO ENTER THE "PR1" PARAMETER LIST
To change the parameter's value operate as follows:
Enter the Programming mode by pressing the Set1 and DOWN key for 3s
The controller will show the first parameter present in the Pr1 menu:
Bottom menu: label
Upper menu: value
To exit: Press SET + UP or wait 15s without pressing a key.
1.8 HOW TO ENTER IN PARAMETERS LIST "PR2"
To access parameters in "Pr2":
Enter the "Pr1" level.
Select "Pr2" – "PAS" parameter and press the "SET1" key.
The flashing value "0 - - " is displayed. use o
The security code is "321".
If the security code is correct the access to "Pr2" is enabled by pressing "SET1" on the last digit.
Another possibility is the following:
After switching ON the instrument, within 30 seconds, push SET1 + n
1592017050 XLR470 GB r1.0 24.05.07.doc
Operating manual
Celsius degree
Fahrenheit degree
Compressor 1 on
Anti-short cycle delay enabled for compressor 1
Compressor 2 on
Anti-short cycle delay enabled for compressor 2
Defrost 1 in progress
Drip time in progress for section 1
Defrost 2 in progress
Fan1 enabled
Drip time in progress – section 1
Fan2 enabled
Drip time in progress– section 2
ALARM signal
o or n
o o
n n
n within 15s.
) for 3s.
o or n
n to input the security code and confirm the figure by pressing "SET" key.
o o
n n
MEANING
) for 3s.
n keys together for 3s: the Pr2 menu will be entered.
n n
XLR470
cod. 1592017
cod. 1592
cod. 1592
cod. 1592
017050
017
017
050
050
050
6/18