dixell COOL MATE XLR470 Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Controlador de temperatura dixell COOL MATE XLR470. dixell COOL MATE XLR470 18 páginas. Dual temperature controller

Imprimir página
dixell COOL MATE XLR470 Manual de instruções
dIXEL
dIXEL
dIXEL
dIXEL
To lock and unlock the keyboard.
+
To enter the programming mode.
+
To exit the programming mode.
+
1.4 MEANING OF THE ICONS
ICON
FUNCTION
ON
ON
ON
FLASHING
ON
FLASHING
ON
FLASHING
ON
ON
FLASHING
ON
FLASHING
ON
1.5 HOW TO SEE AND MODIFY THE SET-POINT
Push and release the SET1 or SET2 key:
the bottom display shows the label St1 or St2
the upper display shows the Set point value flashing
To change the Set value push the o
To memorise the new set point value push the SET1 or SET2 key again or wait 15s.
1.6
HOW TO START A MANUAL DEFROST FOR THE SECTION 1 OR SECTION 2
To start a defrost for the section 1: push the DOWN key(
To start a defrost for the section 2: push the UP key(
1.7 HOW TO ENTER THE "PR1" PARAMETER LIST
To change the parameter's value operate as follows:
Enter the Programming mode by pressing the Set1 and DOWN key for 3s
The controller will show the first parameter present in the Pr1 menu:
Bottom menu: label
Upper menu: value
To exit: Press SET + UP or wait 15s without pressing a key.
1.8 HOW TO ENTER IN PARAMETERS LIST "PR2"
To access parameters in "Pr2":
Enter the "Pr1" level.
Select "Pr2" – "PAS" parameter and press the "SET1" key.
The flashing value "0 - - " is displayed. use o
The security code is "321".
If the security code is correct the access to "Pr2" is enabled by pressing "SET1" on the last digit.
Another possibility is the following:
After switching ON the instrument, within 30 seconds, push SET1 + n
1592017050 XLR470 GB r1.0 24.05.07.doc
Operating manual
Celsius degree
Fahrenheit degree
Compressor 1 on
Anti-short cycle delay enabled for compressor 1
Compressor 2 on
Anti-short cycle delay enabled for compressor 2
Defrost 1 in progress
Drip time in progress for section 1
Defrost 2 in progress
Fan1 enabled
Drip time in progress – section 1
Fan2 enabled
Drip time in progress– section 2
ALARM signal
o or n
o o
n n
n within 15s.
) for 3s.
o or n
n to input the security code and confirm the figure by pressing "SET" key.
o o
n n
MEANING
) for 3s.
n keys together for 3s: the Pr2 menu will be entered.
n n
XLR470
cod. 1592017
cod. 1592
cod. 1592
cod. 1592
017050
017
017
050
050
050
6/18