Altocraft 241-9902 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Altocraft 241-9902. Altocraft 241-9902 9 pagina's. 18v cordless drill & worklight kit
Pagina afdrukken
PRECAUTIONS FOR BATTERY and CHARGER
!
CHARGE BATTERY AT LEAST 6 HOURS before initial use.
1. CHARGE AT ROOM TEMPERATURE. The temperature must be higher
2. DO NOT CHARGE IF THE CHARGER'S CORD OR PLUG IS DAMAGED.
3. DO NOT CAUSE A SHORT IN THE BATTERY TERMIANLS. . Take care that
4. DO NOT INCINERATE THE BATTERY
This product has been carefully engineered and manufactured to give you
dependable operation. Please read this manual thoroughly before operating your
new product, as it contains the information you need to become familiar with its
features and obtain the performance that will bring you continued use for many
years.
WARNING! The warnings, cautions, and instructions detailed in this manual cannot
!
•
•
•
•
•
•
•
•
•
•
•
•
•
than 32°F and lower than 122°F.
Charging with a damaged cord may result in a fire or electrical shock.
charger is damaged in any way, have it repaired by a qualified serviceman.
metal such as paper clips, nails, the sides of a metal tool box do not cause a
short in your battery. Extremely high temperatures and fire can result.
cover all possible conditions and situations that occur.
USE COMMON SENSE AND CAUTION WHEN OPERATING THE TOOL.
Cordless Drill
Cordless Spotlight with swivel head
1 battery
3 to 5 hour charger
2 double-ended screwdriver bits (stored in the clips on the drill handle), each
with 1/4" slot and #2 Phillips tips
Voltage: 18 volts DC
No load speed: 0 - 600 RPM
Reversible With Electric Brake
Chuck: 3/8" Keyless
Spotlight bulb: 10 watt with a spare bulb stored inside the head
Charger: 3 to 5 Hour CUL & UL-Approved
Battery: 18V Ni-Cd rechargeable
Torque: 20 Clutch Settings (plus drill setting)
SPECIFICATIONS
If the
3