Altocraft 241-9902 Посібник оператора - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник оператора для Дриль. Altocraft 241-9902. Altocraft 241-9902 9 сторінок. 18v cordless drill & worklight kit

Друкувати сторінку

PRECAUTIONS FOR BATTERY and CHARGER

CHARGE BATTERY AT LEAST 6 HOURS before initial use.

1. CHARGE AT ROOM TEMPERATURE. The temperature must be higher

2. DO NOT CHARGE IF THE CHARGER'S CORD OR PLUG IS DAMAGED.

3. DO NOT CAUSE A SHORT IN THE BATTERY TERMIANLS. . Take care that

4. DO NOT INCINERATE THE BATTERY

This product has been carefully engineered and manufactured to give you

dependable operation. Please read this manual thoroughly before operating your

new product, as it contains the information you need to become familiar with its

features and obtain the performance that will bring you continued use for many

years.

WARNING! The warnings, cautions, and instructions detailed in this manual cannot

•

than 32°F and lower than 122°F.

Charging with a damaged cord may result in a ﬁre or electrical shock.

charger is damaged in any way, have it repaired by a qualiﬁed serviceman.

metal such as paper clips, nails, the sides of a metal tool box do not cause a

short in your battery. Extremely high temperatures and ﬁre can result.

cover all possible conditions and situations that occur.

USE COMMON SENSE AND CAUTION WHEN OPERATING THE TOOL.

Cordless Drill

Cordless Spotlight with swivel head

1 battery

3 to 5 hour charger

2 double-ended screwdriver bits (stored in the clips on the drill handle), each

with 1/4" slot and #2 Phillips tips

Voltage: 18 volts DC

No load speed: 0 - 600 RPM

Reversible With Electric Brake

Chuck: 3/8" Keyless

Spotlight bulb: 10 watt with a spare bulb stored inside the head

Charger: 3 to 5 Hour CUL & UL-Approved

Battery: 18V Ni-Cd rechargeable

Torque: 20 Clutch Settings (plus drill setting)

SPECIFICATIONS

If the