Acoustical Systems UNI P2S Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acoustical Systems UNI P2S. Acoustical Systems UNI P2S 8 pagina's. Universal high-precision phono pivot-to-spindle direct measuring instrument

Pagina afdrukken

A brief introduction

The UNI-P2S is a high-precision and universal

versatile positioning and measuring instrument for

use with phono tonearms turntables. It allows

precise measurement of mounting distance -

P2S or pivot-to-spindle distance - of any given

tonearm.

Furthermore the user can determine whether a

given mounted tonearm does meet the mounting

distance required or asked for in it's specifications

- i.e. whether it is correct mounted.

This applies to all pivot tonearms – no matter

what effective length, mounting distance or

specific geometry a given tonearm may ask for.

The UNI-P2S further gives the options to:

- draw an arc of suitable mounting distance on a

plinth/armboard to find the optimal position(s)

of a to-be-mounted tonearm.

- mark a drilling hole with the sharp tip of the

stainless steel pin.

- locate perfect center of tonearm - either with tip

of pin or (if center isn't visible without question)

center the outer dimensions of bearing house by

using the cross-hairs on the reticule.

The UNI-P2S works DIRECT with the following

alignment tractors:

- UNI-Protractor

- Mint LP

- Wally

- Dennesen Soundtraktor

- Schön template 1 and 2

This means you can use the UNI-P2S mounted

WHILE any of the above mentioned protractors

are in use and thus checking mounting distance

"on-the-fly" - while aligning the tonearm/

cartridge.

It further offers precise help with some protractors

so you can determine the proper orientation of

help lines towards the pivot.

To ensure the high precision the UNI-P2S comes

with a special designed vernier scale.Thus giving

an accuracy in read-out of 5/100 mm.

Precise P2S distance is impossible without precise

centering.

The UNI-P2S works with the 3 spindle adapters

and the stainless steel locator pin with cross lines

of the UNI-Protractor to ensure perfect center

without play.

Each UNI-P2S was carefully checked and tested

prior to shipment.

Please do get yourself familiar to the handling and

use of the UNI-P2S.

While it is a mechanical positioning instrument, it

needs a minimum of attention to detail by the user

to obtain the maximum precise results it ensures if

handled correctly.

To get access to all possible features of the UNI-

P2S it is inevitable to read this manual. But most

important please study the step-by-step pictured

instruction to learn how to set-up the UNI-P2S

correctly.