Acoustical Systems UNI P2S Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acoustical Systems UNI P2S. Acoustical Systems UNI P2S 8 pagina's. Universal high-precision phono pivot-to-spindle direct measuring instrument

Pagina afdrukken

Step 5

Adjust the clearance underneath the acrylic arm,

so that the acrylic arm is horizontal.

Step 7

Do mount the long stainless steel positioning pin

with the reticule either on top or pointing down-

ward into the nylon tunnel. It will fit quite tight

- handle with care, as the tip is sharp and may

cause injuries. Do untight the black screw on the

POM-block carrying the metric scale. Slide the

metric arm with the pin toward the center of the

arm bearing house.

If you can spot the center, use the pin-point.

Try to locate pin exact over the pivot center.

If unsure of pivot center, do use the reticule and

determine pivot center by finding symmetrical

outer lines on the bearing house.

Step 6

Slide the UNI-P2S into place in the direction of

the tonearm's bearing house/pivot.

Step 8

When pivot center is directly underneath the pin,

do fasten the screw holding the metric scale in

place.

Now look on the scale on the POM block.