dji INSPIRE 2 Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} dji INSPIRE 2. dji INSPIRE 2 18 pagina's. Focus handwheelremote controller stand
Ook voor dji INSPIRE 2: Gebruikershandleiding (14 pagina's), Handleiding voor onderhoud en reparatie (6 pagina's), Disclaimer en veiligheidsvoorschriften (20 pagina's), Veiligheidsvoorschriften (4 pagina's), Handmatig (2 pagina's), Gebruikershandleiding (5 pagina's), Snelstarthandleiding (9 pagina's)

dji INSPIRE 2 Snelstarthandleiding
Using Inspire 2
1. Download the DJI GO 4 App
Search 'DJI GO 4' on the App Store or
Google Play and download the app to your
mobile device.
DJI GO 4 App
First-time activation requires your DJI account and internet connection.
Internet
DJI GO 4 app supports iOS 9 (or later) or Android 4.4 (or later).
3. Check the Battery Levels and Power on
Press once to check the
battery level.
Press once, again and
hold to turn on/off.
B
A
Only use battery slot A when using one battery to supply power.
4. Charge the Batteries
Press the release button and open the corresponding charging port cover.
Insert the Intelligent Flight Battery into the charging port to begin charging.
1
A
2
Charging Time: 1.5 hours*
The Intelligent Flight Battery must be fully charged before using it for the first time. Make sure to press the release button on the Charging
Hub's top when removing the fully charged battery.
Only use the official DJI charger and Charging Hub with your Intelligent Flight Battery and remote controller.
When charging is complete, the LED lights on the Intelligent Flight Battery will turn off, and the LED on the Charging Hub will show green.
Power off the remote controller before charging. When charging is complete, the LED lights on the remote controller will turn off.
The Charging Hub will sound a signal when the battery has been fully charged. The sound can be turned on or off by toggling the switch
under the hub.
Press the button on the battery once to check the battery level.
When the temperature is lower than 10℃, press and hold for 3 seconds to heat the battery. The battery will maintain a temperature
between 15-20℃ for approximately 20 minutes. Press and hold 3 seconds again to stop heating the battery.
Pairing batteries is recommended. This can be done inside DJI GO 4 app. Ensure each battery pair is charged and discharged
simultaneously to prolong their service life and for a better flight experience.
6
2. Watch the Tutorial Videos
Watch the tutorial videos at www.dji.com or in
the DJI GO 4 app.
High
Low
B
Charging Time: 3 hours*
Tutorial Videos
Low
Power Outlet
100-240V
B
A
* Provided charger
High