dji INSPIRE 2 Посібник із швидкого старту - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Дрони dji INSPIRE 2. dji INSPIRE 2 18 сторінок. Focus handwheelremote controller stand
Також для dji INSPIRE 2: Посібник користувача (14 сторінок), Посібник з технічного обслуговування та ремонту (6 сторінок), Відмова від відповідальності та інструкції з техніки безпеки (20 сторінок), Посібники з техніки безпеки (4 сторінок), Посібник (2 сторінок), Посібник користувача (5 сторінок), Посібник із швидкого старту (9 сторінок)

dji INSPIRE 2 Посібник із швидкого старту
Using Inspire 2
1. Download the DJI GO 4 App
Search 'DJI GO 4' on the App Store or
Google Play and download the app to your
mobile device.
DJI GO 4 App
First-time activation requires your DJI account and internet connection.
Internet
DJI GO 4 app supports iOS 9 (or later) or Android 4.4 (or later).
3. Check the Battery Levels and Power on
Press once to check the
battery level.
Press once, again and
hold to turn on/off.
B
A
Only use battery slot A when using one battery to supply power.
4. Charge the Batteries
Press the release button and open the corresponding charging port cover.
Insert the Intelligent Flight Battery into the charging port to begin charging.
1
A
2
Charging Time: 1.5 hours*
The Intelligent Flight Battery must be fully charged before using it for the first time. Make sure to press the release button on the Charging
Hub's top when removing the fully charged battery.
Only use the official DJI charger and Charging Hub with your Intelligent Flight Battery and remote controller.
When charging is complete, the LED lights on the Intelligent Flight Battery will turn off, and the LED on the Charging Hub will show green.
Power off the remote controller before charging. When charging is complete, the LED lights on the remote controller will turn off.
The Charging Hub will sound a signal when the battery has been fully charged. The sound can be turned on or off by toggling the switch
under the hub.
Press the button on the battery once to check the battery level.
When the temperature is lower than 10℃, press and hold for 3 seconds to heat the battery. The battery will maintain a temperature
between 15-20℃ for approximately 20 minutes. Press and hold 3 seconds again to stop heating the battery.
Pairing batteries is recommended. This can be done inside DJI GO 4 app. Ensure each battery pair is charged and discharged
simultaneously to prolong their service life and for a better flight experience.
6
2. Watch the Tutorial Videos
Watch the tutorial videos at www.dji.com or in
the DJI GO 4 app.
High
Low
B
Charging Time: 3 hours*
Tutorial Videos
Low
Power Outlet
100-240V
B
A
* Provided charger
High