dji MATRICE 300 RTK Onderhoudshandleiding - Pagina 12
Blader online of download pdf Onderhoudshandleiding voor {categorie_naam} dji MATRICE 300 RTK. dji MATRICE 300 RTK 19 pagina's. Dual gimbal connector
Ook voor dji MATRICE 300 RTK: Productinformatie (17 pagina's), Onderhoudshandleiding (19 pagina's), Gebruikershandleiding (15 pagina's), Snelstarthandleiding (10 pagina's), Productinformatie (10 pagina's)
Pagina afdrukken
MATRICE 300 RTK Maintenance Manual
1. Clean the foreign objects near the ports with a
gauze.
2. If the port is in use, disconnect the cable, then
check if there are foreign objects in the port
with the help of a light.
3. Remove the foreign objects such as small
pieces of stones and pieces of paper in the
Data Ports
port using tweezers.
4. Clean the gluey foreign materials in the port
with a gauze.
5. Place the aircraft so that the port is facing
downward, and then use a tool such as a
gauze or brush to remove the powder materials
in the port. Note to sweep from the inside to the
outside.
Heat
1. There is no blockage in the heat dissipation
Dissipation
vents. The cooling fans work smoothly without
Vents
noise.
Rubber Port
1. The rubber port covers are not damaged or
Covers
loose.
1. The dampeners are not damaged, loose, or
Gimbal
aged.
Damping
The gimbal connector can rotate smoothly.
Plate
2. The screws connecting the damping plate and
aircraft body are secure.
12
©
2020 DJI All Rights Reserved.
Top View
Bottom View
Top View
Bottom View