dji MATRICE 300 RTK Bakım Kılavuzu - Sayfa 12

Dronlar dji MATRICE 300 RTK için çevrimiçi göz atın veya pdf Bakım Kılavuzu indirin. dji MATRICE 300 RTK 19 sayfaları. Dual gimbal connector
Ayrıca dji MATRICE 300 RTK için: Ürün Bilgileri (17 sayfalar), Bakım Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Ürün Bilgileri (10 sayfalar)

MATRICE 300 RTK Maintenance Manual

1. Clean the foreign objects near the ports with a

gauze.

2. If the port is in use, disconnect the cable, then

check if there are foreign objects in the port

with the help of a light.

3. Remove the foreign objects such as small

pieces of stones and pieces of paper in the

Data Ports

port using tweezers.

4. Clean the gluey foreign materials in the port

with a gauze.

5. Place the aircraft so that the port is facing

downward, and then use a tool such as a

gauze or brush to remove the powder materials

in the port. Note to sweep from the inside to the

outside.

Heat

1. There is no blockage in the heat dissipation

Dissipation

vents. The cooling fans work smoothly without

Vents

noise.

Rubber Port

1. The rubber port covers are not damaged or

Covers

loose.

1. The dampeners are not damaged, loose, or

Gimbal

aged.

Damping

The gimbal connector can rotate smoothly.

Plate

2. The screws connecting the damping plate and

aircraft body are secure.

Top View

Bottom View

Top View

Bottom View