ARTHUR HOLM DB1Twin Montage-instructies - Pagina 14

Blader online of download pdf Montage-instructies voor {categorie_naam} ARTHUR HOLM DB1Twin. ARTHUR HOLM DB1Twin 16 pagina's.

ARTHUR HOLM DB1Twin Montage-instructies
OPTION 3
- Veneer material can't be conductor.
1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces
are touching each other in the whole length. If there is a gap between the Veneer and the monitor, check if the hole
depth in the Veneer is correct. (To make easier the adjustment the hight of the copper cylinder can be barely
adjusted.)
2. Clean the top surface of the metal monitor housing and the
bottom surface of the Veneer.
3. Glue the Veneer. Double-side tape or glue can be used
(depending on the kind of materials are going to be jointed).
Double-side tape or glue used can't be thicker than 0,2-
0,25mm [0.008-0.01]
Veneer Guide (Optional)
The pressure applied
must not exceed 1 Kg
evenly distributed on
monitor surface.
14