ARTHUR HOLM DB1Twin Instruções de montagem - Página 14
Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior ARTHUR HOLM DB1Twin. ARTHUR HOLM DB1Twin 16 páginas.
OPTION 3
- Veneer material can't be conductor.
1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces
are touching each other in the whole length. If there is a gap between the Veneer and the monitor, check if the hole
depth in the Veneer is correct. (To make easier the adjustment the hight of the copper cylinder can be barely
adjusted.)
2. Clean the top surface of the metal monitor housing and the
bottom surface of the Veneer.
3. Glue the Veneer. Double-side tape or glue can be used
(depending on the kind of materials are going to be jointed).
Double-side tape or glue used can't be thicker than 0,2-
0,25mm [0.008-0.01]
Veneer Guide (Optional)
The pressure applied
must not exceed 1 Kg
evenly distributed on
monitor surface.
14