dji Ronin Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dji Ronin. dji Ronin 8 pagina's. Raveneye image transmission system

Method 3: use RavenEye with only the camera

1. Attach the image transmitter to the camera.

2. Connect the HDMI port of the image transmitter to the HDMI port of the camera using the provided HDMI cable

according to the camera model.

3. Connect the shutter control port of the camera to the RSS camera control port of the image transmitter.

Connect the mobile device and the image transmitter via Wi-Fi. You can use the mobile device to control the

camera and access the camera view.

It is recommended to turn oﬀ the Bluetooth on your mobile device to avoid interference.

The camera view can also be accessed on the touchscreen of DJI RS 2. Slide down on the

touchscreen from the top to enter the camera view.

Status LED Descriptions

Power on the gimbal, camera, and image transmitter. The Status LED indicates the status of the image transmitter.

Status LED

Descriptions

Solid red

Not connected

Solid blue

HDMI or Wi-Fi connected and the Ronin app launched

Solid green

Both HDMI and Wi-Fi connected, and the camera view can be accessed on the Ronin app

Using RavenEye via the Ronin App

Launch the Ronin app. Tap "Connect to RavenEye" and follow the onscreen instructions to start.

When using RavenEye with DJI RS 2, disconnect the Bluetooth connection between the mobile device

and gimbal and connect the Wi-Fi in order to use the Ronin app and RavenEye.

HDMI

RSS