dji Ronin Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів dji Ronin. dji Ronin 8 сторінок. Raveneye image transmission system
Друкувати сторінку
Method 3: use RavenEye with only the camera
1. Attach the image transmitter to the camera.
2. Connect the HDMI port of the image transmitter to the HDMI port of the camera using the provided HDMI cable
according to the camera model.
3. Connect the shutter control port of the camera to the RSS camera control port of the image transmitter.
Connect the mobile device and the image transmitter via Wi-Fi. You can use the mobile device to control the
camera and access the camera view.
It is recommended to turn off the Bluetooth on your mobile device to avoid interference.
The camera view can also be accessed on the touchscreen of DJI RS 2. Slide down on the
touchscreen from the top to enter the camera view.
Status LED Descriptions
Power on the gimbal, camera, and image transmitter. The Status LED indicates the status of the image transmitter.
Status LED
Descriptions
Solid red
Not connected
Solid blue
HDMI or Wi-Fi connected and the Ronin app launched
Solid green
Both HDMI and Wi-Fi connected, and the camera view can be accessed on the Ronin app
Using RavenEye via the Ronin App
Launch the Ronin app. Tap "Connect to RavenEye" and follow the onscreen instructions to start.
When using RavenEye with DJI RS 2, disconnect the Bluetooth connection between the mobile device
and gimbal and connect the Wi-Fi in order to use the Ronin app and RavenEye.
6
HDMI
RSS