Artila RIO-2015PG Hardware Handleiding - Pagina 10

Blader online of download pdf Hardware Handleiding voor {categorie_naam} Artila RIO-2015PG. Artila RIO-2015PG 12 pagina's. Freertos programmable remote i/o module

Pagina afdrukken

RIO-2015PG Hardware Guide

3.5

1-Wire (CN2: P1~P3)

VCC (CN2: P1): +5VDC output for 1-wire sensor

1-Wire (CN2: P2): 1-wire data

GND (CN2: P3): power ground

3.6

Isolated Analog Input (CN2: P4~P12)

AIN1+ (P4): analog input + channel 1

AIN1- (P5): analog input - channel 1

AIN2+ (P6): analog input + channel 2

AIN2- (P7): analog input - channel 2

AIN3+ (P8): analog input + channel 3

AIN3- (P9): analog input - channel 3

AIN4+ (P10): analog input + channel 4

AIN4- (P11): analog input - channel 4

AGND (P12): isolated ground

V/A

3.7

Isolated Analog Output (CN2: P13~P16)

AO_1 (P13): analog output + channel 1

AGND (P14): isolated ground

AO_2 (P15): analog output + channel 2

AGND (P16): isolated ground

3.8

LED Status

The LED provides the RIO-2015PG operation information. The LED status is described as follow:

Power LED: Power LED keeps ON if power (+9VDC to +48VDC) is correct.

Ready LED: Ready LED keeps ON when RIO-2015PG firmware is ready for operation.

LAN LED: Link and Activity LED will turn ON when the Ethernet cable is connected. When there

is network data traffic, this LED will flash.

LED 1: This LED is dual color and it indicates the serial data traffic of RS-485, RS-232 and serial

console respectively. The Yellow LED stands for receiving data and Green LED means

transmitting data.

PGA

120Ω

AGND