Artila RIO-2015PG Donanım Kılavuzu - Sayfa 10
I/O Sistemleri Artila RIO-2015PG için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Artila RIO-2015PG 12 sayfaları. Freertos programmable remote i/o module
RIO-2015PG Hardware Guide
3.5
1-Wire (CN2: P1~P3)
VCC (CN2: P1): +5VDC output for 1-wire sensor
1-Wire (CN2: P2): 1-wire data
GND (CN2: P3): power ground
3.6
Isolated Analog Input (CN2: P4~P12)
AIN1+ (P4): analog input + channel 1
AIN1- (P5): analog input - channel 1
AIN2+ (P6): analog input + channel 2
AIN2- (P7): analog input - channel 2
AIN3+ (P8): analog input + channel 3
AIN3- (P9): analog input - channel 3
AIN4+ (P10): analog input + channel 4
AIN4- (P11): analog input - channel 4
AGND (P12): isolated ground
V/A
3.7
Isolated Analog Output (CN2: P13~P16)
AO_1 (P13): analog output + channel 1
AGND (P14): isolated ground
AO_2 (P15): analog output + channel 2
AGND (P16): isolated ground
3.8
LED Status
The LED provides the RIO-2015PG operation information. The LED status is described as follow:
Power LED: Power LED keeps ON if power (+9VDC to +48VDC) is correct.
Ready LED: Ready LED keeps ON when RIO-2015PG firmware is ready for operation.
LAN LED: Link and Activity LED will turn ON when the Ethernet cable is connected. When there
is network data traffic, this LED will flash.
LED 1: This LED is dual color and it indicates the serial data traffic of RS-485, RS-232 and serial
console respectively. The Yellow LED stands for receiving data and Green LED means
transmitting data.
+
PGA
120Ω
_
AGND
¡
6
¡
AD
DC
DC