Custom Crimp CC150MOB Series Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Custom Crimp CC150MOB Series. Custom Crimp CC150MOB Series 15 pagina's. Hose crimper with dial micrometer and 240 tons of crimping force has the capability to crimp up to 2" industrial hose
Pagina afdrukken
CC150MOB
Proper lubrication is essential to prevent damage to the machine and to
assure accurate crimping.
•
Use the mini grease gun with flush fitting adapter with grease (supplied
with the crimper) or a high-pressure moly grade grease can be used
as well.
•
Failure to lubricate the crimper can cause premature failure, loss of
accuracy and may result in damage to the crimper.
•
Lubricate the crimping head after each 250 - 400 crimping
cycles or at the start of each shift if the crimper is used in a
production setting.
To begin, first bring the master dies to the fully opened position and
lubricate the die fingers through the 8 lubrication fittings in the front
flange face.
Next, bring the master dies to the fully closed position, and lubricate the
master dies through the 8 lubrication fittings again.
Note:
Use only a high-quality moly-disulfide grease. Failure to do so may
result in damage to the wearing surfaces.
Front flange bolts: Periodically, every 6-12 months depending upon
usage, the front flange bolt torque should be checked. The correct torque
is 199NM (147 ft-lbs).
The Protective Master Die Foam Pads: Periodically
you need to check them for dirt, oil, and other debris.
The protective pads
(as shown in photo #3) should be replaced if damaged,
missing, or not retracting properly.
General Production Hose Crimper
LUBRICATION AND MAINTENANCE
11