djpower XUN V-5 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} djpower XUN V-5. djpower XUN V-5 17 pagina's.
Pagina afdrukkenV-5 USER MANUAL
5.3.2
Menu Map
Display
Heating Up
Temp
Heating Up
Preparing
Pressure
Page
Heating Up
Delat
Ready to Spark
Temp
Ready to Spark
Standby
Page
Pressure
Ready to Spark
Delat
Spark ON
Temp
Spark ON
Operation
Page
Pressure
Spark ON
Delat
DMX Address
Pressure Set
Status Pages
Test Spark
Manual Clear Up
ON/OFF
Description
550
Shows the device is heating
The current temperature, current pressure and delay
time will cycle through the display.
23
1.0S
580
The equipment preheating is completed.
The current temperature, current pressure and delay
23
time will cycle through the display.
1.0S
630
Show the device working status.
The current temperature, current pressure and delay
23
time will cycle through the display.
1.0S
Press ▲ and ▼ to set the DMX start address
512
Equipment pressing pressure setting
Press ▲ and ▼ to set the air pressure value
45
Equipment manual switch injection test.
This menu is only useful if it is enabled under the
ON/OFF
Manual Job Settings page in the Advanced menu.
Manually set the cleanup switch
This menu is only useful if it is enabled under the
Manual Job Settings page in the Advanced menu.
8
Parameter
Range
530℃-630℃
530℃-630℃
1-512
15-45
ON/OFF
ON/OFF