djpower XUN V-5 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} djpower XUN V-5. djpower XUN V-5 17 pagina's.

V-5 USER MANUAL
5
OPERATION
5.1

Preparing for Operation

After checking that all the parts are intact and complete, position the machine on flat.
Fill the consumable into feed port when power off.
Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.
Turn on the machine, it will immediately start heating up.
5.2
On-device Control Panel
To access the control panel functions, use the four buttons located underneath the LCD display.
Button
Function
<MENU>
Switch menu pages
Add submenu
Reduce submenu
<ENTER>
Short press: return to the home page. Long press for 2 seconds to switch to the advanced
interface
5.3
Device control mode and operation
5.3.1
Operation guide
Refer to the Menu page for menu options, including the operator interface displayed and the values available for
selection.
Press the <MENU> key repeatedly to the page you want to set, until the parameter setting page appears. The value
that appears on this page is the first value for this parameter.
Press ▲ or ▼ to set or select a parameter value on the current page. If it exceeds the parameter range, you will see
the first parameter or the set value.
Press the <MENU> key repeatedly to switch sequentially between different menu pages.
Press <ENTER> at any time to switch between the current menu page and the standby page
7