djpower XUN V-5 사용자 설명서 - 페이지 8
{카테고리_이름} djpower XUN V-5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower XUN V-5 17 페이지.
V-5 USER MANUAL
5
OPERATION
5.1
Preparing for Operation
•
After checking that all the parts are intact and complete, position the machine on flat.
•
Fill the consumable into feed port when power off.
•
Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.
•
Turn on the machine, it will immediately start heating up.
5.2
On-device Control Panel
To access the control panel functions, use the four buttons located underneath the LCD display.
Button
Function
<MENU>
Switch menu pages
▲
Add submenu
▼
Reduce submenu
<ENTER>
Short press: return to the home page. Long press for 2 seconds to switch to the advanced
interface
5.3
Device control mode and operation
5.3.1
Operation guide
•
Refer to the Menu page for menu options, including the operator interface displayed and the values available for
selection.
•
Press the <MENU> key repeatedly to the page you want to set, until the parameter setting page appears. The value
that appears on this page is the first value for this parameter.
•
Press ▲ or ▼ to set or select a parameter value on the current page. If it exceeds the parameter range, you will see
the first parameter or the set value.
•
Press the <MENU> key repeatedly to switch sequentially between different menu pages.
•
Press <ENTER> at any time to switch between the current menu page and the standby page
7