djpower XUN V-5 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan DJ djpower XUN V-5. djpower XUN V-5 17 halaman.

V-5 USER MANUAL

OPERATION

5.1

Preparing for Operation

•

After checking that all the parts are intact and complete, position the machine on flat.

•

Fill the consumable into feed port when power off.

•

Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.

•

Turn on the machine, it will immediately start heating up.

5.2

On-device Control Panel

To access the control panel functions, use the four buttons located underneath the LCD display.

Button

Function

<MENU>

Switch menu pages

▲

Add submenu

▼

Reduce submenu

<ENTER>

Short press: return to the home page. Long press for 2 seconds to switch to the advanced

interface

5.3

Device control mode and operation

5.3.1

Operation guide

•

Refer to the Menu page for menu options, including the operator interface displayed and the values available for

selection.

•

Press the <MENU> key repeatedly to the page you want to set, until the parameter setting page appears. The value

that appears on this page is the first value for this parameter.

•

Press ▲ or ▼ to set or select a parameter value on the current page. If it exceeds the parameter range, you will see

the first parameter or the set value.

•

Press the <MENU> key repeatedly to switch sequentially between different menu pages.

•

Press <ENTER> at any time to switch between the current menu page and the standby page