Custom Crimp CC4-50 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Custom Crimp CC4-50. Custom Crimp CC4-50 17 pagina's.

INITIAL SET UP & MAINTENANCE

Do not lift the machine by the crimper head. Lift with a fork lift

under the tank.

Mount the crimper on a sturdy surface

Electrical Requirements:

220 Volt 3 Phase Current (Standard)

440 Volt 3 Phase Current (Optional)

Check to be certain that the motor rotates in the direction of the

arrow shown on the motor housing. If motor rotation is opposite of

the direction of the arrow, reverse any two hot wires in the

electrical plug.

Damage to the pump can result if the motor does not rotate in the

correct direction.

Check the oil level in the sight glass on the rear of the crimper. 8

U.S, gallons of ISO 46 hydraulic oil are required to completely

refill the tank.

Oil can be drained from either of the two ports at the bottom of the

tank.

An additional oil cooler, while not normally required, can be

plumbed into the two ports at the rear of the crimper

Front Flange Bolts: Periodically, every 6-12 months depending

upon useage, the front flange bolt torque should be checked. The

correct torque is 330NM (243 Ft Lbs)

Front Flange Bolts

Page