Alula CAM-DB-JS1 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Alula CAM-DB-JS1. Alula CAM-DB-JS1 8 pagina's. Video doorbell

Camera installation

Whether you have a standard or a digital doorbell, the setup process is the

same.

a. Turn off power to the doorbell

b. Remove the existing doorbell button and disconnect the two wires

c. Attach the wires to the terminals on the back of the Video Doorbell

d. Install the Digital Adapter to the door chime as shown below

e. Proceed to next step below

Digital Adapter

Mounting the doorbell

Note: Do not mount the video doorbell until you have completed the in-app

connection and have the wiring completed. It is best to test the camera's

functionality with the app prior to mounting.

Ensure the installation location is free from moisture and wires are not

exposed

a. Install the bracket where the previous doorbell was using the template,

2 small screws, and if necessary, the anchors.

b. Make sure the wires are fed through the appropriate square opening

in the bracket. Line up the video doorbell on the bracket and slide

down until secure.

c. When installed, turn power back on. Wait until the LED ring repeatedly

flashes 3 times (approx. 90 seconds for the unit to reboot)

angle bracket

Note: It does not matter which wire

connects to which terminal of the

doorbell. It also does not matter which

Digital Adapter wires are connected

to the Front or Trans terminals. If you

have a digital door chime and your

doorbell button has an additional diode

connected to it, do not use it on the new

Video Doorbell.

flat mount