Alula Connect+ Snelstarthandleiding - Pagina 4
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Alula Connect+. Alula Connect+ 8 pagina's.
Ook voor Alula Connect+: Handleiding voor hardware-instellingen (2 pagina's)
Pagina afdrukken
10
Install the Glassbreak Sensors
the window(s) being protected, maintain line-of-
sight from glassbreak sensor to window(s). Remove
protective backing and apply VHB tape to the back
of the housing. Press and hold sensor in place for
20 seconds. VHB tape is permanent on painted
wallboard, ensure the area
is clean and dry before
application. Alternately, #6
screws and wall anchors can
be used for mounting.
11
Place Flood Temp Sensors
requiring flood or temperature detection, such as
a bathroom, utility room, sump pump or laundry
area. If desired, the
wall clip can be used
to secure it to a wall or
baseboard, ensure the
sensor maintains contact
with the floor surface
for flood detection. This
sensor detects water
pooled directly beneath
the sensor and reports
extreme temperature
conditions. High temperature alarms at 100°F,
freeze point alarms at 45°F. Contact us if you prefer
to customize Flood Temp Sensor default settings.
12
Place a PINPad or Keypad near entryways or in
a bedroom
for convenient arming
and disarming. If you've ordered
either of these devices with your
security system, they are already
programmed and can be attached
to a wall or placed on a tabletop
or shelf. Refer to the
installation guides
provided with the
products for detailed
installation and
operation information.
Page 4
3' to 25' from
in a location
13
The Slimline Touchpad and the Flat Mount
Touchpad
are the most advanced, wireless, on-site
control interface available for your security system.
They can be placed
on a tabletop or
mounted on the
wall. A power supply
is included with the
product, plugging
the power supply
into a wall outlet powers the touchscreen. See the
detailed instructions provided with your Touchpad
on mounting and enrollment to your Connect+
Hub and local Wi-Fi network. Before permanently
mounting your Touchpad to a wall, note the signal
strength for communication needs to be at least
35. This number will show after the initial startup.
Pro Tip: If you ordered the touchpad with your
security system, skip step one in the installation
guide on installing the Wi-Fi DeviceLink Card in
your Connect+ Hub.
14
The Alula Mobile
App
is the perfect
compliment to your
Touchpad, allowing
each user encrypted,
interactive control of
your security system,
automation devices and
video cameras from
anywhere, at any time.
Your hub and sensors are
already programmed to
the Alula Hub and will
auto-populate in the App
after login.
15
Download the Alula
Mobile App
from the Apple App Store or Google
Play Store to each user's smartphone or tablet.
Enter "Alula Security" in the app store's search
field. Open the app and enter the user name and
password credentials recorded on page 1 of this
quick start guide. Use the same username and
password on all users' smartphones.