Aluprof ER-P Series Handleiding voor programmering - Pagina 6
Blader online of download pdf Handleiding voor programmering voor {categorie_naam} Aluprof ER-P Series. Aluprof ER-P Series 8 pagina's.
Ook voor Aluprof ER-P Series: Programmeerhandleiding (9 pagina's)
Pagina afdrukken
8. ERASING THE LIMIT POSITIONS
The MOTOR can't be in the limit positions during reset.
Press the „P2" button and hold it
for 7 seconds.
9. ERASING ONE TRANSMITTER.
Switch to programming mode
according to point 4.
10. PROGRAMMING THE DIRECTION OF MOVEMENT
Switch to programming mode
according to point 4.
11. ACTIVATION OF THE IMPULSE MODE
Switch to programming mode
according to point 4.
6
PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES
After 1 second the motor will
make a short move DOWN - UP.
Press the „P2" butto and hold for
1 second.
Press the „DOWN" button.
Press the „STOP" button.
After 7 seconds the motor will
make two short moves DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
The limit positions
have been deleted.
The transmitter has been
deleted.
The setting has been saved.
The setting has been saved.
We reserve the right to any technical change.
Valid on 2022.01.27