Alva GH313 Trainingshandleiding - Pagina 5

Blader online of download pdf Trainingshandleiding voor {categorie_naam} Alva GH313. Alva GH313 9 pagina's.

Leak Test:

The leak test must be carried out in a well-ventilated area, free from any flames

or other sources of ignition.

Foamy

bubbles

indicate a

leak

Connections to be leak tested

Regulator into cylinder

Hose to regulator

Hose to appliance

Fig.F

Connection

With the cylinder connected to the heater. Open

in assembly

the cylinder valve.

Brush the connections (heater to cylinder) with a

solution of equal parts soap and water (make sure

it's foamy).

A stream of bubbles forming indicates a gas leak.

(See Fig.F)

If bubbles appear, turn the cylinder valve OFF

(clockwise) and disconnect the heater from the

gas cylinder.

Tighten the connection and retry the leak test.

If you are unsure or if you cannot tighten the

connection, place the cylinder outside in a cool,

well-ventilated area and contact ALVA on 086 100

(ALVA) 2582.

A leak between the heater and cylinder can lead

to a high pressure fire, which is very dangerous

and can result in extensive injury or even death.