Alva GHP50 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Alva GHP50. Alva GHP50 18 pagina's. Wall mounted patio heater

METHOD OF ASSEMBLY

Fig.A

purged (cleared out), before its first use. If it is not purged of air,

the heater will not work properly. This should happen at the gas

filling station when you fill up the cylinder. Always check this with

your gas supplier.

1. Before removing this heater from the packaging, read this

manual in full and make sure that it is what you want/need.

2. Remove the heater from the packaging.

9kg ALVA cylinder recommended

with a 5/8" BSP thread; horizontal

exit valve. The Bullnose Regulator

(not supplied with the heater)

tightens to the left hand side (anti-

clockwise) (figure A).

If you have bought a new gas

cylinder, the cylinder needs to be

WARNING:

This heater oper-

ates directly on an

industrial cylinder with

a 5/8" HORIZONTAL

exit valve, (ALVA 9kg

industrial size). It is

NOT to be used on a

domestic cylinder with

a 3/8" VERTICAL exit

valve.