DLS DD33-40 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DLS DD33-40. DLS DD33-40 20 pagina's. 600w /3 channel audiophile cool running digital amplifier

Pagina afdrukken

Single RCA / Low Level Input

Fig.7a Input using Single RCA or

3.5mm AUX Cable

Choose the correct length and style of RCA interconnects for your needs. Always use high quality RCA audio

cables (not supplied) for signal connections—those with multiple layers of shielding or a twisted pair variety

for better noise rejection. Be extra careful when routing your RCA audio interconnect cables. Car

environments are notorious for poorly insulated wires. This means that hiss, engine noise, and fan noise can

easily be picked up through RCA cables if run incorrectly. Make sure that the cables for power and audio

signal are not on the same side of the vehicle and that they do not cross each other; this will help reduce any

noise that may radiate from the power cable and the signal cable. If an audio cable is too close to a power

cable, it may pick up the magnetic field generated by the power cable, which could lead to a loss of quality

in your signal.

NOTE: A side panel AUX Input is available for use with portable MP3 players or an iPod ®* Use

of this input will not override (defeat) the

RCA low level inputs.

*NOTE* The Aux input sensitivity is reduce when RCA/High level input is connected. If higher sensitivity is required please

disconnect front input from other source. AUX input note: When Aux input is connected to a phone it will attenuate RCA/HL inputs,

please disconnect the Aux source plug (phone) to have full volume from other source.

HLC harness: With the special high level adapter the front input can be used with speaker input signals.

SOURCE INTERCONNECT