Blue Aura WS30i Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Blue Aura WS30i. Blue Aura WS30i 10 pagina's. Powered stereo loudspeaker system
Pagina afdrukkenWhat's in the box?
1 x Pair loudspeakers –
1 x active 1 x passive
2 x Power cords/Power supplies
1 x 1.2m speaker connection
cable
The loudspeakers are covered with a soft faux leather material.
Please take care when unpacking the speakers to avoid scratching or
indenting the material.
Before installing this product please read all of the instructions.
The amplifier inside the LEFT loudspeaker has built in thermal and short circuit
protection.
If an amplifier is driven beyond its power output capabilities it will produce
distorted sound which may damage your loudspeakers. Make sure you do not
leave your loudspeakers unattended when playing and reduce the volume at the
first sign of audible distortion.
We recommend that you keep all packing until you are completely satisfied with
your purchase.
Please register your product by completing the form at the back of this manual
or by registering on line at www.blueaura.co.uk/register
If your product was purchased outside the UK please return this card to your
local distributor.
Page | 1
1 x Remote control
1 x Line out cable- (RCA – mini
jack)
1 x 3.5mm Mini Jack cable
(3.5mm mini jack – 3.5mm mini
jack)
Getting Started
Place the WS30 speakers in your preferred position – the left
speaker should be within reach of a wall socket.
Left and Right speakers can be identified by looking at the rear
of the cabinet. L Left & R Right
With the mains socket in the OFF position, connect the mains
lead to the speaker using only the supplied mains lead and
power supply. Turn the mains socket ON
Connect the Left and Right speakers together using the sup-
plied speaker cable ensuring correct polarity. The speaker
cable has a RED stripe running along the length. Connect the
RED wire to the RED terminal and clear wire to the Black
terminal.
Always reduce the volume on the remote
control before switching between devices.
Connect your "device" using the appropriate supplied cable.
•3.5mm headphone jack can be used to connect directly
from a device with headphone socket to the LINE IN socket
on the back of the WS30.
•3.5mm headphone jack to AUX IN (RCA) can be used to
provide the option of a second source device. (By using the
remote you can switch between devices)
The same lead (reversed) can be used to connect from a device
with AUX OUT (e.g.TV) to LINE IN on the back of the WS30.
Using the remote control press the SOURCE button to select
your device.
The left WS30 speaker is equipped with an LED to indicate
which device is selected.
RED LED -LINE IN. BLUE LED - AUX IN.
Page | 2