Blue Aura WS30i Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Blue Aura WS30i. Blue Aura WS30i 10 pagina's. Powered stereo loudspeaker system
Pagina afdrukken.....Make your WS30i system wireless!
(WSTxR required – optional extra)
The WS30 is supplied with built in USB power supply and USB socket.
The WS30 can easily be upgraded to work wirelessly with source
devices. (the USB socket is for the wireless Receiver only)
Instructions for using the WSTxR
The transmitter is used to send the audio signal from the source
device to the receiver (plugged into the back of the left WS30 loud-
speaker)
The Transmitter can be identified by the
can be identified by the
symbol printed next to the LED on each
unit.
To use your WS30 speakers with a PC or MAC in wireless mode -
MAC set-up
1.Insert the USB connector from the transmitter to a free USB
socket on your MAC
2.Go to System Preferences and under Hardware choose Sound
3.Click Output in Menu and choose USB headset.
PC set-up
1.Insert the USB connector from the transmitter to a free USB
socket on your PC or laptop
2.Wait until the software has been installed, usually a confirmation
beep or message window alert
If the above instructions do not work you may need to do the following
Click Start button on PC, go to the Control Panel, and choose
Sound & Sound Devices
Under Playback of Audio; Default unit choose USB headset.
If you are still having problems please contact [email protected]
Page | 3
symbol and the Receiver
Insert the USB connector from the Receiver to the
USB socket on the back of the WS30 (left speaker).
Connect one end of the 3.5mm mini jack to the
Receiver and the other end into the LINE IN (3.5mm)
socket on the back of the WS30.
Always reduce
With the WS30 powered ON, press the SOURCE
button on the remote control. The left WS30
the volume on
speaker is equipped with an LED to indicate which
the remote con-
device is selected.When using LINE IN (3.5mm), the
trol before
LED on the front of the WS30 should be RED.
switching
AUX IN can also be used. Connect one end of the
between devices.
3.5mm mini jack to the Receiver and the RCA
(red/white) end into the AUX IN sockets on the back
of the WS30. When using AUX IN, the LED on the
front of the WS30 should be BLUE. Press the
SOURCE button on the remote control to switch
between devices.
Wireless Transmitter and Receiver Status
When the transmitter is connected to a source device the LED will
intermittently flash
There are 3 zones available to use. Red, Green and Blue.
The aim is to get the same colour on the Transmitter as the Receiver.
This is achieved by pressing the button in the centre of both the
Transmitter and Receiver until they are the same colour. The LED's in
the Transmitter and Receiver will intermittently flash until locked
on.
PC/MAC
MP3 player
Transmitter 1
Transmitter 2
Blue
Green
CD player/TV
Transmitter 3
Red
Page | 4