Dodge 078289 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Dodge 078289. Dodge 078289 8 pagina's.

Hydraforce RV08-20H-0-N5/.75

CAUTION: Dodge recommends the oil temperature to be

70°F or above before equipment operation.

MAINTENANCE

Periodically check the oil level in the bearing housings and the

Cool Lube 2 to ensure proper operation.

Most foreign material in a system flushes to the reservoir after

the first few hours of operation. We recommend that you drain

the tank, replace the fluid, change the filter, and clean the suction

strainer after 3-5 hours of operation. After the initial cleaning,

the strainer should be cleaned at a minimum of every 4000 hours

of operation. More frequent cleaning is required if the system is

used in a highly contaminated atmosphere such as a foundry or

paper mill.

After the initial replacement, the supply line filter should be

replaced periodically as required by operating conditions. Check

the visual clog indicator on the filter head between filter changes

to ensure the filter is not being bypassed.

NOTE: Cool Lube 2 Units manufactured after September

2016 utilize a new relief valve for the pressure line only.

Previous Relief Valve: Hydraforce RV08-20H-0-N-5/.75

New Relief Valve: Fulflo VJ-3R/HS/WS

For Cut Sheets of each valve, contact manufacturers.

Figure 7 - Relief Valves

Fulflo VJ-3R/HS/WS

MN3082