ASI MFC2000 Operatie - Pagina 18

Blader online of download pdf Operatie voor {categorie_naam} ASI MFC2000. ASI MFC2000 19 pagina's.

Last update: 2021/12/20 16:41

Indoor use only

ms2000, manual,

0-10v

If you do not see "Ports (COM & LPT)" when the drivers are installed and the controller connected and

powered up, then the computer may not fully support USB and RS-232. Certain inexpensive laptops

have been observed with this defect. The workaround solution for this problem is to use a Serial Port

PCI Card. Alternately, your computer may work with a Keyspan USA19HS High Speed USB / Serial

Adapter. This device, a cable with two connectors, plugs into your USB port, and the other end is a

serial port connector. With either the Keyspan or the Serial Card, you connect the device to the

controller via a serial null modem cable. A serial null modem cable is furnished with each ASI

controller and widely available at computer stores. Note that if the words "NULL MODEM" are not

stamped on the connectors of a serial cable, it is probably not a null modem cable.

From:

https://asiimaging.com/docs/

Permanent link:

https://asiimaging.com/docs/ms2000_operation

Last update: 2021/12/20 16:41

https://asiimaging.com/docs/

ms2000_operation

WARNINGS

Ensure power switch is in the OFF position before

plugging in the power cord.

Do not unplug or plug-in devices / cables when power

is on.

Do not remove the cover; no user serviceable parts are

inside.

For indoor use only.

Keep clear of moving equipment. ASI Stages have

current limits on the motors to prevent excessive

traveler force from doing permanent bodily harm, but

pinches can still be painful.

Protection provided by the equipment may be impaired

if the equipment is used in a manner not speciﬁed by

ASI.

In the event of device failure, contact ASI: (541)

461-8181

(800) 706-2284

International: 011-541-461-8181

- Applied Scientiﬁc Instrumentation

https://asiimaging.com/docs/ms2000_operation

Printed on 2022/03/16 04:45