ASI RM2000 Operatie - Pagina 2

Blader online of download pdf Operatie voor {categorie_naam} ASI RM2000. ASI RM2000 19 pagina's.

Last update: 2021/12/20 16:41

Rocker Switch - Clutch Enable

The Clutch Enable Switch allows the user to disconnect the Z-Axis motor from the microscope's ﬁne

focus knob by setting the switch to "Disengaged" (no dot on switch). When switching from

"Disengaged" to "Engaged" (white dot on switch), the current position of the Z-Axis is locked in,

canceling any previously given Move commands. When the drive is "Disengaged," the feedback

encoder still provides position information for the Z-axis LCD display. In some system conﬁgurations,

the rocker switch is not used, or used for other special purposes.

LCD Screen

The Liquid Crystal Display (LCD) screen shows the current position coordinates of the axes with status

information displayed to the right. A dim back illumination allows users to clearly view the screen

even in a darkened room without causing light pollution. The LCD display has four display modes

selected by DIP switches 1 & 2 on the back panel. The display modes have the following

characteristics:

Mode 1 - SW 1 & 2 DOWN Normal Display with Controller Firmware Version Line Shown

4 Line version

2 line version

This display shows the stage position in millimeters with ﬁve digits of precision with the status

indicators on the right side.

Mode 2 - SW 1 DOWN & SW 2 UP Normal Display with Status Line Shown

https://asiimaging.com/docs/

ms2000_operation

Note: MS2000 and RM2000 have a 4-line LCD . MFC2000

controllers only have a two line LCD.

https://asiimaging.com/docs/ms2000_operation

Printed on 2022/03/16 04:45