ACR Electronics RLB-41 Handleiding productondersteuning - Pagina 11

Blader online of download pdf Handleiding productondersteuning voor {categorie_naam} ACR Electronics RLB-41. ACR Electronics RLB-41 20 pagina's.

Step 2: Mount the bracket

Category I bracket mounting: To access the bracket's five pre-drilled mounting holes, remove the bracket's lid by

turning the spring loaded knob on the lid 1/4 turn counterclockwise and pulling. The lid will lift away from the top of the

base and disengage at the bottom of the base. The lid is tethered to the base to help prevent loss. (If this tether is

somehow broken off, please have it replaced to prevent the inadvertent loss of the top cover.) Pull the beacon with

steady pressure from the bracket. For normal use situations, four of the five holes can be used to mount the bracket. It is

therefore not necessary to remove the HydroFix HRU to mount the bracket using all five holes. For extreme use

situations, remove the HydroFix HRU and deploy the ejector spring for access to the fifth mounting hole. Hold the bracket

in place to mark the screw holes or use the provided mounting template. The use of #10 pan head stainless steel

fasteners [minimum of ½" (1.27 cm) long] and #10 ½" (1.27 cm) washers is recommended.

NOTE: FASTENERS AND WASHERS NOT INCLUDED.

11 |

P a g e