AMCOL 3500-ETC Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler AMCOL 3500-ETC. AMCOL 3500-ETC 12 stron. Electronic timing controller
Również dla AMCOL 3500-ETC: Opis techniczny (8 strony)

Drukuj stronę

Manual Actuation

To manually test the system to observe spray output,

perform the following:

• Confirm settings are correct.

• Press the left button on the PLC inside the ETC

enclosure. The system status will display manual

and perform one spray cycle. Holding the

button will perform multiple cycles until the

button is released.

Manual operation should be used to verify current settings, test spray coating,

and troubleshoot errors.

3500-ETC Operator's Manual

P a g e | 8