AMCOL 3500-ETC Panduan Operator - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pengontrol AMCOL 3500-ETC. AMCOL 3500-ETC 12 halaman. Electronic timing controller
Juga untuk AMCOL 3500-ETC: Deskripsi Teknis (8 halaman)

Halaman Cetak

Manual Actuation

To manually test the system to observe spray output,

perform the following:

• Confirm settings are correct.

• Press the left button on the PLC inside the ETC

enclosure. The system status will display manual

and perform one spray cycle. Holding the

button will perform multiple cycles until the

button is released.

Manual operation should be used to verify current settings, test spray coating,

and troubleshoot errors.

3500-ETC Operator's Manual

P a g e | 8