Flomec G Series Instrukcja obsługi produktu - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Przyrządy pomiarowe Flomec G Series. Flomec G Series 20 stron. Industrial and chemical models
Również dla Flomec G Series: Instrukcja obsługi (16 strony), Instrukcja obsługi produktu (20 strony)
Drukuj stronę
Replacement Kits
A replacement kit is comprised of all the internal component parts within the turbine
flowmeter. A replacement kit consists of the following:
FLOMEC Sanitary Turbine supports are not identical in design. The rear support
assembly has a shaft that supports the rotor; the front support does not.
Notice that the direction of flow is displayed on the body of the turbine flowmeter.
This is important when installing the supports and rotor and it also denotes the
direction in which the turbine flowmeter was calibrated.
1. Install the front support placing a vane between the notches in the turbine
flowmeter body. Install a retaining ring to keep the support in place.
2. Place the rotor assembly on the shaft of the uninstalled rear support assembly.
NOTE: FLOMEC Sanitary Turbine rotors are tapered on one end. The tapered end
should be installed facing the front support (see Figure 1).
Figure 1
Parts Description
Rotor Assembly
Support (Front)
Support Assembly (Rear)
Retaining Ring
Quantity
1
1
1
2
7