Coastal WEATHERPAK TRx2 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Stacja pogodowa Coastal WEATHERPAK TRx2. Coastal WEATHERPAK TRx2 18 stron.

Drukuj stronę

CHAPTER 6

Once assembled, the WEATHERPAK

transmits data to the Receiver/Display every 30 seconds.

The Receiver/Display takes approximately 5 -10 seconds to complete a boot-up routine. When this

process is complete, the Receiver/Display is ready to accept the first transmission from the

WEATHERPAK

. You can now view the data on the Receiver/Display box, run plume modeling

software, or view and archive the data using Coastal's optional INTERCEPT™ Software.

CHAPTER 7

When the WEATHERPAK

your computer, real-time data is available to run air dispersion plume modeling software.

IMPORTANT NOTE: Some earlier versions of ALOHA

Station for Atmospheric Measurement (SAM); the WEATHERPAK

provides CAMEO

/ALOHA

http://www.epa.gov/osweroe1/content/cameo/index.htm

The following is a brief outline of the steps taken to produce an ALOHA

operating Windows

. Our assumptions are that the user is familiar with ALOHA

program is properly loaded onto the user's computer. Coastal Environmental Systems

recommends consulting the ALOHA

training, program details and limitations.

1. Open ALOHA

menu. An "Air Model Limitations" dialogue box will appear with important notes on program

limitations. Read them, and then select "OK".

2. A "Text Summary" window will appear with information summarizing the event.

3. Confirm that your "Site Data" information is correct. If required, use the [SiteData] drop-

down menu to change data.

4. Select the drop-down menu [SetUp] – [Chemical]. Choose the appropriate chemical.

5. Select the drop-down menu [SetUp] – [Atmospheric] – [SAM Station]. A series of dialogue

boxes will then appear requiring user observations or assumptions. Please Note

humidity is not automatically captured by the ALOHA

using data from the WEATHERPAK

6. (Optional) To confirm that the WEATHERPAK

drop-down menu [SAM Options] – [Processed Data]. A "Processed SAM Data" window will

appear.

Please Note: If the WEATHERPAK

minutes, a warning message will be displayed in both the Text Summary and Processed

SAM Data windows.

P/N: 0302-117-002 Rev. C

SYSTEM OPERATION



automatically begins sampling weather conditions and

WEATHERPAK

is set up and operational, and the Receiver/Display box connected to

software downloads, support, and information at its website:

web site and/or a certified CAMEO

by clicking on its desktop icon, or selecting it from the Windows

AND PLUME MODELING SOFTWARE

need to be upgraded in order to work with a

model and may be manually entered

display.

data is being delivered to ALOHA

has been collecting data for less than five

WEATHERPAK

User's Manual

is a SAM. The U.S. EPA

plume model on a PC

and that the

/ALOHA

instructor for

Programs

: relative

, use the

TRx 2