Aktakom AMM-1022 Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Multimetr Aktakom AMM-1022. Aktakom AMM-1022 18 stron.

AMM-1022

plug to the COM jack and the red one to the TEMP jack,

touch the end of the temperature sensor to the area or

surface of the object for measurement.

- You can get reading from LCD.

To avoid electrical shock, do not connect the

thermocouples with the electriferous circuit.

4.7 Transistor measurement

- Set the rotary switch to hFE range.

- Determine whether the transistor to be tested is NPN or

PNP type and locate the Emitter, Base and Collector

leads.

- Insert leads of the transistor into proper holes of the hFE

socket.

- The meter will show the approx. hFE value at test

condition of base current 10μA and Vce 2.8V.

To avoid electrical shock and/or damage to the

instrument,

transistors for testing, always be sure that test

leads have been disconnected from any

measurement circuits．

before

attempting

insert