Aktakom AMM-1022 사용자 설명서 - 페이지 15

{카테고리_이름} Aktakom AMM-1022에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom AMM-1022 18 페이지.

AMM-1022

plug to the COM jack and the red one to the TEMP jack,

touch the end of the temperature sensor to the area or

surface of the object for measurement.

- You can get reading from LCD.

To avoid electrical shock, do not connect the

thermocouples with the electriferous circuit.

4.7 Transistor measurement

- Set the rotary switch to hFE range.

- Determine whether the transistor to be tested is NPN or

PNP type and locate the Emitter, Base and Collector

leads.

- Insert leads of the transistor into proper holes of the hFE

socket.

- The meter will show the approx. hFE value at test

condition of base current 10μA and Vce 2.8V.

To avoid electrical shock and/or damage to the

instrument,

transistors for testing, always be sure that test

leads have been disconnected from any

measurement circuits．

before

attempting

insert