Aero-Spa AP 1000 Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Dozownik wody Aero-Spa AP 1000. Aero-Spa AP 1000 13 stron.
Również dla Aero-Spa AP 1000: Instrukcja instalacji (12 strony)

Drukuj stronę

Aero-Spa not running / No bubble from sintered diffuser

1. Verify unit is receiving power

a. Reset GFCI breaker.

b. Reset circuit breaker at house fuse panel.

2. Bypass timer, if this corrects the problem, replace timer

3. Verify ozone tube is not broken, pinched, or disconnected

4. If these steps do not solve the problem call Aero-Spa, LLC

A condition typically associated with organic particulates from oils,

soaps, or materials inside piping of the hot tub.

1. Increase runtime by (2) hours. Synchronize circulation pump

and Aero-Spa run time.

2. If not resolved within (4) days, contact Aero-Spa, LLC

Strong ozone odor near Aero-Spa generator

1. Verify ozone tube is not broken

2. Verify ozone tube is not pinched or disconnected

3. Unplug unit and call Aero-Spa, LLC

1. Reduce cycle run time by 25%. Repeat if odor remains strong

after 1 hour.

2. Unplug unit and call Aero-Spa, LLC

Ozone tube is cloudy in color and not flexible

This is normal, periodically check for cracks in ozone tube.

Replacement parts are available from Aero-Spa, LLC

This is a result of the ozone precipitating the iron out of the water. It

will not cause any issues with the operation of the diffuser. This

typically occurs when the water used to fill the hot tub has high iron

content. The diffuser can be soaked in "rust or stain remover" or

similar product and rinsed thoroughly after soaking.

TROUBLESHOOTING

Water is cloudy

Strong ozone odor in hot tub

Sintered diffuser is turning brown