Aktobis WDH-930EEW Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Suszarka Aktobis WDH-930EEW. Aktobis WDH-930EEW 16 stron. Building dryer

Drukuj stronę

Functional description:

2.)

1.)

1.) On/Off switch

2.) "Tank full" signal light

3.) "Defrost" signal light (unit in defrost mode)

4.) "Air circulation strength" signal lights

5.) "WLAN function" signal light

6.) "Timer activated" signal light

7.) Display field for A) temperature and B) timer (flashing)

Instructions for use:

1. Commissioning

1.1. Mounting the castors:

Remove the four (4) supplied and unassembled castors from the condensation tank.

Then lay the construction dryer on the floor so that the castors can be attached to the

bottom of the unit. Now push the castors into the device in the direction of the arrow

until they lock into place. Now put the construction dryer back in place and wait approx.

30 minutes so that the internal coolant can settle again.

1.2. Insert the mains plug properly into the socket.

1.3. Check that the condensation tank is properly seated in the building dryer. (When using

the dryer for the first time, the "condensation tank full" light may come on. Simply pull the

condensation tank out briefly and then push it back in again and you are ready to go).

1.4. Switch on the unit with the "On/Off switch". Now press the setting button for "Value down".

Now you can set your target humidity with the arrow keys (▼▲) as desired. The target

value of 30% humidity actually corresponds to continuous operation !!!

1.5. Use the air circulation selection button to choose between weak

air circulation.

1.6. Optionally, you can select an automatic operating time between 1-24 hours with the timer key. Press the timer

button and then the setting button (▼▲) repeatedly until you have selected the desired number of hours. After

this timer time has elapsed, the building dryer switches off automatically! If you want to stop the timer before

the set time has elapsed, set it to zero again!

5.)

3.)

4.)

9.)

10.)

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

6.)

8.)

7.)

8.) Display panel for A) Humidity

and B) Target humidity value (flashing)

9.) Button for selecting the air circulation

10.) Timer button (1-24 hours)

11.) Setting button for "value up" (▲)

12.) Setting button for "value down" (▼)

www.AKTOBIS.de

Email: [email protected]

11.)

12.)

and strong

(strong/weak)