American Recorder AllCast MULTI-FUNCTION MONITOR STAND Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Stojaki i stojaki American Recorder AllCast MULTI-FUNCTION MONITOR STAND. American Recorder AllCast MULTI-FUNCTION MONITOR STAND 8 stron.

Drukuj stronę

STEP 7

STEP 7a - Assemble MONITOR ARM onto the pole as shown and

secure by tightening arm support bolt with 6mm Allen Wrench Key.

MONITOR ARM

STEP 7c - Place WEBCAM BRACKET on RING

LIGHT PLATE

STEP 8

STEP 8a - Place microphone in cradle and fasten

threaded knobs. Hand tighten only. (run USB-C cable

into mic and run cable along arm to USB-3.0 hub)

ALLCAST MULTI STAND OWNERS MANUAL ver2.0

Saturday, February 20, 2021 3:05:57 PM

INSTALL SINGLE MONITOR MOUNT

INSTALL DUAL MONITOR MOUNT

Ring Light & HD Webcam Mount

INSTALL SINGLE MONITOR MOUNT

INSTALL DUAL MONITOR MOUNT

Attach Microphone & Light Controller

STEP 8b - Place rubber controller

holder and grip onto mic cradle

GRIP

STEP 7b - Attach RING LIGHT/WEB CAM PLATE to

monitor arm. Fasten with thumb knob.

STEP 7d - Attach 6" RING LIGHT to base of RING LIGHT PLATE and thread

with 1/4"-20x0.40 thumbscrew. Attach HD WEBCAM to upper base of

WEBCAM BRACKET, fasten with 1/4"- 20 x 0.25 thumb screw (run Webcam

and light cable down back of stand to base, use round clips to secure).

1/4"-20 x 0.25"

THUMBSCREW

1/4"-20 x 0.40"

THUMBSCREW

STEP 8c - (Run RING LIGHT & MIC USB cables

from base of stand to front of mic arm, use

rectangle clips to secure wire). Insert light

controller into rubber boot.

LIGHT

CONTROLLER

BOOT

WEBC AM

HD FULL

100